Saturday, May 2, 2009

Kung Fu Panda Modeling

Image

2. Start by creating a sphere in Top viewport. Use Radius=78 and Segments=12. Position this sphere at Po head (look at image below). Apply material to this sphere. Use Opacity=50% so you can see blueprint behind. You can use any color you want. Later, you can change Opacity value at ay time to help you in modeling.

Image

3. In Left or Front viewport, move sphere down while holding Shift. You will get sphere clone. Use Copy for cloning method. In Command Panel, go to Modify tab, increate cloned sphere radius to 117. Place this cloned sphere in Po's belly. Select one sphere—any sphere you want—then right click and choose Convert to>Convert to Editable Poly. Next, go to Modify tab, in Edit Geometry rollout, click Attach button and click another sphere. Two sphere will be combined into one object.

Image

4. Activate Polygon selection. Select several polygons like image below, and delete them.

Image

5. Change to Vertex selection. In Front and Left viewport, move vertices position. Tips: In Front viewport, you can select a loop of vertices and scale them along horizontal axis using Select and Non-Uniform Scale tool. Use image below for reference.

Image

6. Now, choose Border selection. Select two borders like image below. To select more than one border, hold Ctrl while selecting. In Edit Borders rollout, click Bridge to fill gap with new polygons.

Image

7. This conclude first part of Po modeling process. Next, you will modify head area.

Image

Continue previous tutorial. Activate Edge selection. In Left viewport, select all vertical edges in head area (look at image below). Then, in Edit Edges rollout, click Connect. Those edges will be divided.

Image

2. Change selection to Vertex. Now, move vertices using image below for reference..

Image

3. Let's move on. We are going to create a nose. Select two polygons in nose area. Hold Ctrl while selecting to select more than one polygons. In Edit Polygons rollout, click Bevel. Click and drag in viewport, to add slight Bevel to these polygons. Then, scale polygons using Select And Non-Uniform Scale along horizontal axis, to narrow the polygons. Then add another bevel..

Image

4. Next, select several vertices in nose area (look at image below, make sure vertices in the back are not selected), and move them up and down to create better nose shape.

Image

5. Activate Polygon selection. In Front viewport, select half of object (right side). Then, delete those polygons. De-activate all sub-object selection. Next, apply Symmetry modifier. Make sure Mirror Axis=X and Flip is active.

Image

6. Let's continue by creating eyes. In Modifier Stack, click plus (+) sign left of Editable Poly row, then highlight Vertex selection. In Front viewport, select one vertex in eye area. Then in Edit Vertices rollout, click Chamfer button. Click and drag in viewport to chamfer vertex..

Image

7. Change to Edge selection. Select four edges from chamfering result. Then, in Edit Edges rollout, click Settings button right next to Extrude. A small dialog box will open. Enter Extrusion Height = -5 and Extrusion Base Width = 2. Click OK.

Image

8. Next, we are going to create an ear. Change to Polygon selection. In Left viewport, select one polygon like image below. Add bevel to this polygon. Then, using Select and Non-Uniform Scale decrease polygon width. Next step, extrude this polygon twice. Modify vertices position to make ear shape.

Image

9. Po's head is now finished.

Image

. Begin by selecting several polygons in Front viewport (look at image below). Delete them.

Image

2. In Perspective viewport, rotate view until you can see bottom part of Po's model. Make sure you are still in Polygon selection. Activate 3D Snap Toggle. Then, in Edit Geometry rollout, click Create button. Click four times in order (1-4) in viewport to create new polygon. 3D Snap Toggle is activated to make you select vertex position precisely.

Image

3. Change to Edge selection. Select two edges in newly created polygon (look at image below). Then use Connect to create new edge. Change selection to Vertex. Select vertices in newly created edge. In Front viewport, move them down. Then select one vertex only, and move it closer to another vertex (right image below)

Image

4. Activate Border selection. Select border in leg area (look at left image below). Move border while holding Shift button in keyboard. Position vertices using blueprint as reference (look at middle image below). Select border again and Shift+drag to create more polygons for leg. This time, in Edit Geometry rollout, click Make Planar: Z button. The result is like right image below.

Image

5. Shift+drag border three more times again. Then modify vertices position, both in Front and Left viewport.

Image

6. Let's continue to create foot. In Left viewport, select several polygons (left image below). Extrude them. Change to Vertex selection. Modify vertices position to create foot shape (right image below).

Image

7. Next, change to Border selection. Select one border in the bottom of foot. Then, in Edit Borders rollout, click Cap button, to fill the hole with polygon..

Image

8. To finish modeling the foot, we need one more step. Activate Edge selection. Select all vertical edges in the bottom area of foot. In Edit Geometry rollout, click Slice Plane button. Slice plane will appear in viewport (yellow rectangle). Move slice plane down at the most bottom part of foot. Then click Slice button. When finished, turn off Slice Plane button.

Image

9. Next, you are going to create arm and hand.

Image

Continue your previous lesson. In Left viewport, modify several vertices position (left image below). We need to do that before creating arm. When finished, activate Polygon selection. Select several polygons in area where you will create an arm.

Image

2. Apply Extrude to this polygons. In Edit Geometry rollout, click Make Planar: X. Adjust size of polygons using Select and Uniform Scale. In Front viewport, move polygons if necessary to fit blueprint behind. Next, apply Extrude three more times again. You also need to position and scale polygons. When finished, don't deselect polygons but delete them. Finally de-activate all sub-object selection.

Image

3. To create a hand, we are going to create from a box. Later, we will attach this hand object to Po model. Start by creating Box in Top viewport. Use parameters like image below. Move this box close to Po's arm.

Image

4. Convert box into Editable Poly. Adjust several vertices position. Start from Top viewport. Use left image below fro reference. Next, in Front viewport move several vertices up.

Image

5. Activate Polygon selection. Select three polygons in hand object. Extrude twice to create fingers. Then, select one polygon, and extrude to create thumb.

Image

6. Select, 4 polygons in the wrist area of hand object. Delete them. De-activate all sub-object selection. Now, select Po model object. Go to Modify tab. Highlight Editable Poly row in Modifier Stack. In Edit Geometry rollout, click Attach button, then click hand object in viewport. After this, activate Border selection. Select two borders between hand and arm. In Edit Borders rollout, click Bridge to connect hand and arm.

Image

7. In Front viewport, compare model and blueprint. Fit arm and hand based on blueprint behind. You can scale or move vertices..

Image

8. Your Kung Fu Panda model is almost finished. Next, we are going to create Po's pants.

Image

Continue your previous lesson. In Left viewport, modify several vertices position (left image below). Use blueprint behind for reference.

Image

2. Change selection to Edge. Select vertical edges like image below. Use Connect to create horizontal edges. Activate Vertex selection and modify several vertices position to match blueprint..

Image

3. Again activate Edge selection. Select vertical edges like image below. Click Settings button right next to Connect. In opened dialog box, enter Slide = -14. Click OK.

Image

4. Select horizontal edges like image below. Tips: you can select one or two edges and then in Selection rollout click Loop. Click Settings button right next to Chamfer. In opened dialog box, makes sure Chamfer Amount=1. Then click OK. You have added small amount of chamfer.

Image

5. Activate Polygon selection. Select all polygons constructing pant. Make sure you select only polygons between chamfered edges. Then using Select and Uniform Tool, give slight enlargement..

Image

6. Activate Edge selection. Select edges like image below. Apply Chamfer with Amount=1. Change selection to Polygon. Select polygons like middle image below (you need to select 6 polygons here). Then enlarge them a little bit. You will get a belt.

Image

7. Next, select edges like image below (these edges separate pant and body). Give a slight amount of Chamfer, to make boundary between pants and body looks sharp, when we apply model with Turbosmooth.

Image

8. Do we forgetting something? Yup, a tail. De-activate all sub-object selection. Right click model and choose Convert to Editable Poly. Then, in Perspective viewport, rotate view until you can see back of Po model. Activate Vertex selection. Select one vertex in the middle of Po's buttocks. Use Chamfer. Change selection to Polygon. Select newly created polygon. Then use Bevel three times to create a tail. De-activate all sub-object selection.

Image

9. To finish this model. Apply Turbosmooth modifer. Increase Iterations value if you want to get more smooth model.

Image

10. Congrats, you have created Kung Fu Panda model. In the next tutorial, we are going to add texture.

Image

Saturday, April 25, 2009

BOX MODELING FOR BEGINNERS 3ds MAX

i friends,


Today we are going to try our hands on that incredible Modeling Technique in 3ds Max, “The Box Modeling” we’ll be creating a simple SUV model from a Box

























Before that I assume that you are having that basic idea in Max.



  • We’ll start our things by placing a box in the viewport with these dimensions 90,50,50 and for the segments, we’ll go for 6,6,6



  • After that we’ll convert our Box into an Editable Polygon(Right click>convert to>Editable poly)





  • Then select the polygon sublevel and select the Polygons shown in the picture, we are going to make the front area of our SUV




  • We will use the Extrude Option and use the default value for Extruding the selected polygons thrice for the Bonnet.






  • Select the Vertex sub level and adjust the vertices in all viewports for getting the shape shown in the picture.





  • Now select the Polygons shown in the picture for creating the front glass and then inset them with a small value, I used 1.0





  • For the same Polygons we are going to apply a Bevel with both height and inset are -.5





  • Use the same method for window glasses also.






  • Select the polygons shown in the picture for creating a bumper and Extrude them using “local normal” to 1.5 units



Now is the time for Creating wheel arches, back dickey. We will use the Boolean Compound Object here. For that we will create 4 cylinders for wheel arches and a box modified using Editable Polygon method, as the dickey which I shown in the picture.








  • For Boolean we will use a trick. We will attach four cylinders and the dickey object together from “Edit Geometry>attach” because after this Max will consider it as a single object and we can use the Boolean operation only once





  • I used some Tubes and splines to modify the SUV like this..its upto to you.






  • Its almost finished, we are going to make a Tyre. From a Chamfer Cylinder and an Extruded NGon, we can make it very easily like this







  • Now for the front grill. First we will create new edges in the front using Connect option.





  • And then Extrude the Edges with a small value like in the pic

Thursday, April 9, 2009

Creating Grass Land Using Pflow in 3dsmax

First of all, let's start by creating a cone of sides: 6 radius1: .6 radius2: 0 and height: 40. A bend modifier should be applied to the cones. You can even go lesser on the sides if it gives the result you want. you can also create another cone bend in a different angle. Now we have a Cone01, Cone02 and a Plane01. You may name these to Grass1, Grass2,Terrain respectively since I strongly would advise you all to use naming conventions whenever possible, which can save you a lot of time. Using a cone gives you a three-dimensionality to the grass, instead of using a plane. Also create a plane with length: 200 Width: 300, Segments 12*12 and apply a noise modifier with the settings as shown below. Also apply a turbosmooth modifier to it.


Creating Grass Land Using Pflow in 3dsmax

2. Create a particle flow source. In the Main menubar - Create>Particle>particle flow source (Particle flow is an event driven particle system and it gives us more control over the particles than the ordinary particle systems in max which are non-event driven) Press 6 or select the pflow icon and go to the modify panel and click on the particle view button. You will get a window as shown below:

Creating Grass Land Using Pflow in 3dsmax

3. These are the default operators that you get in particle flow. We shall replace some of those with operators from the operators depot to get our desired result. I have marked in the image below where all operators have to be replaced with new ones. For example, the Position Icon operator will be replaced with the Position Object operator by left clicking and dragging the Position Object operator from the operators depot onto the Position Icon operator in event 01. You will see that a red line appears on top of the Position Icon operator, release your left mouse button then. Similarly, change the Shape Operator with Shape Instance operator.

Creating Grass Land Using Pflow in 3dsmax

4. First click on the Birth operator and change the emit stop to 0. Now all 200 particles will be emitted at once rather than one by one. Also give a particle amount of 1000 ( Depends on how much you need and how much area you need to cover).

Creating Grass Land Using Pflow in 3dsmax

5. Click on the Position Object operator, on the right side you can see its properties in the Emitter objects rollout. Click add and select the terrain. You will see that the name of the plane (Terrain) appears in the dialogue box there. See to it that the Lock On Emitter option is also ticked or else the particle will fly off when you play with the animation slider.

Creating Grass Land Using Pflow in 3dsmax

6. Change the Shape operator to Shape Instance operator, after that Click on the Shape Instance operator in the event and in the properties on the right side, click on the none button under particle geometry and select grass1. You can see that lots of ticks get scattered all over the plane. Click on the Display operator and in the type select Geometry which will reveal the grass mesh. You can also change the color to green or apply a material by adding a material dynamic operator

Creating Grass Land Using Pflow in 3dsmax

Creating Grass Land Using Pflow in 3dsmax

You can see that all of the grass blades are bent in different directions and some even go under the terrain. To rectify this problem, click on the Rotation operator and in its properties change the orientation matrix to world space. This aligns the particle according to the world axis and makes it stay perpendicular to the terrain.

Creating Grass Land Using Pflow in 3dsmax

7. This seems a bit unrealistic cause all grass are standing upright and steady like an army of soldiers smile so to break the monotony you can first click on event 01 and right click, select copy and paste it anywhere in the open space nearby - this will create another event 02. Delete the birth operator of event 02.

Creating Grass Land Using Pflow in 3dsmax

8. Add a Split Amount operator to the event 01 below the birth operator. Create a connection from the Split Amount to the event02. In Event02 select the shape instance and select grass2. Now you can see how much the scene has changed. Cool isn't it? You can even copy the Event 02 and create another Event 03 and add split amount to Event 02 and connect the Split Amount to Event03 and select another grass3 as object instance.

Creating Grass Land Using Pflow in 3dsmax


9. In the shape rollout of both Events, you can play with the size and variation to create your own realistic grass scatter.


10 . There are also some specialties about position object operator, select the position object operator and change the location from surface to vertices or edges... try it out and see the difference. There is another option below location called density by material, tick on it. It will be grayscale by default. Apply a checkered texture to the terrain and see what happens (you will have to move the animation slider a bit to see the result).


11. Drag a material dynamic operator into Event 01 open the material editor by pressing M and create a material for the grass select the material dynamic operator, which will reveal the operator properties on the right side. From the material editor, click on the material slot you created and drag it on top of the none button in the material dynamic property. A command will pop up which says instance or copy select instance and click OK cause whatever change you make in the material editor will be in sync with that of the material dynamic in the particle view. For the other events do the same. Variate the color of the grass material a bit, which will give you a more realistic look.

Tuesday, February 24, 2009

Saturday, February 21, 2009

cup

This tutorial needs you to understand basic use of 3dsmax.

Modeling A Mug This simple tutorial is for 3dsmax beginner user. This tutorial will show you how to use Lathe modifier, and couple of Editable Poly features like Connect, Hinge From Edge, and Inset to model a mug. You will be able to model a mug in couple minutes.

1. First, create a new 3dsmax document. Go to Customize>Grid And Snap Settings and make sure Grid Points is checked. Now, in Create tab, click Shapes and click Line button. In Creation Method rollout, choose Corner for Initial and Drag Type. Before you draw a line, activate Snap first. Now, in Front viewport a line like image below.

Image

2. In Command Panel, click Modify tab. Activate Vertex selection in rollout Selection. Select one vertex in the corner and raise Fillet value up. Fillet is located in rollout Geometry. Its corner will be rounded. Use same technique to other corner. When finished, de-activate all sub-object selection.

Image

3. Make sure your line object is selected. Choose Lathe modifier from drop-down Modifier List. In rollout Parameters, check Weld Core, and Flip Normals. Weld core used to weld all vertices around Lathe axis. Flip normal used to backflip normal, and make the surface visible in viewport. Use Min for Align. Your mug will look like image below.

Image

4. Next step, we will create a handle. Right click object and choose Convert to Editable Poly. Activate Edge selection. Using region selection, select all vertical edges in Front viewport. In Edit Edges rollout, click Settings button right next to Connect. In Connect Edges dialog box, enter Segments=5 and click OK. As result, vertical polygon now divided into 5 segments.

Image

5. You may follow this step if you want mug's handle thinner. If not, go directly to next step. Change selection to Polygon. Choose 2 polygons like image below. You need to change Perspective viewport into Edged Faces view (press F4 in keyboard) to select polygons easily. In Edit Polygons rollout, click Inset button. Click and drag in viewport to make an inset (smaller size polygon) to those polygons.

Image

6. Select a polygon in upper part of mug. In Edit Polygons rollout, click Settings button right next to Hinge from Edge. A dialog box will appear. Click Pick Hinge button, click an edge in the middle part of mug (look at image below). Use spinner to change Segments to 8 and Angle to 160 degrees. When you change these values, an arched handle created. Click OK when finished.

Image

7. Next, we need to fix lower part of handle. Select polygon in the farthermost part of handle and polygon facing it in mug body. In Edit Polygons rollout click Bridge button to connect handle to mug.

Image

8. De-activate all sub-object selection. Now, finish this tutorial by adding a TurboSmooth or MeshSmooth modifier to your mug model. Image below shows finished and rendered model.

Image